| |
ribbon-howto.html
|
|
Index | Favors | Personalized
Ribbon |
How to make a bow
PERSONALIZED
RIBBONS - How to make a Bow
Step 1
Cut your
ribbon between the small gap; this is usually
between the name (on right) and date (on left)
every 13 to 14 inches. The ribbon should be
placed upside down but the print should be facing
you.
Step 2
Loop the right side over the left side.
|
|
Step 3
Pull
the top of the loop down
to the point where the ribbon
crosses.
This is the shape your bow will be.
|
Step 4
Now take your bow wire and cut a 6"
strip.
Place the wire over the center of the
bow.
|
|
Step 5
Bend the wire towards the back of the
bow,
all the way back and twist tightly 3
times.
The
wire that extends out from the back of
the
bow can be used to attach your bow to a
favor.
|
This is your
final Product!
|
We welcome
questions, suggestions, or comments
CONTACT US
BridalShopStore.com
Division of Wax
Wizard Candles
|
|
|
